Air conditioner electricity cost in Singapore

Year-round heat and humidity make compressor runtime, set point, room leakage, and the current quarterly electricity tariff central to cooling cost.

Rate used for the starting scenarioSGD 0.3478/kWh

Use the GST-inclusive regulated tariff or the exact retail-plan rate applying to the hours when the air conditioner operates.

Billing scopeSingapore

Confidence A 99/100. Effective 2026-07-01 to 2026-09-30.

Check official source ↗

Live local scenario

Calculate with an editable rate.

Air conditioners cycle or modulate, so scheduled hours alone overstate energy use. The active-runtime input represents average compressor load across the operating window.

01

Your scenario

Change any value. Results update instantly.

Active runtime accounts for cycling. Use 100% for devices that draw the rated power continuously.

02

Your reading

Planning range · based on your inputs
Estimated monthly costSGD 69.63

Likely planning range SGD 57.10–SGD 82.16

Per daySGD 2.29
Per active hourSGD 0.29
Per yearSGD 835.55
Energy / month200.2 kWh

FormulakW × runtime × tariff

Month52 weeks ÷ 12

Data qualitySelf-entered estimate

Worked calculation

A Singapore starting scenario

1.500 kW is multiplied by scheduled time and the 55% active-runtime assumption. The inputs are examples, not claims about every device. Replace each one with the label, meter reading, schedule, and tariff that apply to you.

AC cost = rated kW × scheduled hours × active-runtime share × tariff
Inputs shown

1500 W · 8 hours/day · 7 days/week · 55% active

Monthly energy
200.2 kWh
Monthly cost
SGD 69.63
Annual cost
SGD 835.55
Calculated at SGD 0.3478/kWh

Transparent method

The local calculation

AC cost = rated kW × scheduled hours × active-runtime share × tariff

The device model stays global. The currency, tariff scope, validity period, and billing cautions come from the Singapore data layer.

Read the methodology →

Before trusting the result

Three checks for Singapore

01

Model sleeping-hours and all-day use separately.

02

Use a higher duty cycle for humid rooms or low set points.

03

Refresh the rate when EMA publishes a new quarter.

Turn estimates into evidence

Measured this device in Singapore?

The calculator accepts anonymous smart-plug, meter, charger, or utility readings after the result. A real measurement improves the country-device cohort without exposing your name or exact address.

Contribute a real reading

Calculation standards

Visible inputs. Reproducible results.

WhoPowerCost Lab's research desk maintains the formulas, market notes, and worked examples.

HowEnergy, tariff, and behavioural assumptions stay separate so readers can replace one input without hiding the others.

WhyThe page exists to answer an operating-cost decision. Advertising never changes a formula, default, or recommendation.